![]() Expansion slots Two 16x PCI-E 2.0 slots (16x or two 8x), one 4x PCI-E.Memory support 4 slots: max 32GB DDR3 (2,200MHz).CPU support LGA1155 Core i3, Core i5 and Core i7.On paper this looks like a good match, but we can’t help thinking that the board would be better based on the P67 chipset, as the Z68 chipset doesn’t offer any major extra features that would interest enthusiasts. This is included because the board is based on the premium Z68 chipset, which can access the onboard GPU with which LGA1155 processors are equipped. The final talking point is also located here, and takes the form of an HDMI output. The rear I/O panel is also well appointed, with a monstrous tally of 10 USB ports (8 USB 2, 2 USB 3), a PS/2 port, two eSATA ports and a CMOS reset switch all located here. Meanwhile, the chunky heatsinks that cool the 8+4 phase VRM circuitry look good and are pleasingly solid they don’t move or bend when subjected to the bit-tech wiggle test. Consequently, it’s a smart way of saving space and traces. It makes lots of sense, though, as the expansion slot that should be here would be largely redundant anyway, given that so many graphics cards are now fitted with dual slot coolers. This is because Asus hasn’t fitted an expansion slot between the two 16x PCI-E slots. The only oddity of the layout is the fact that there are only three expansion slots on the board instead of the usual four. The important power sockets are located close to the edge of the board, and the RAM slots are sufficiently far away from the CPU socket to allow reasonably large DDR3 modules to fit alongside a large cooler. The board also comes with a healthy count of four USB 3 ports (two on the back panel, and two via an internal header), Asus’ useful MemOK! memory debugger and onboard power, reset and overclocking buttons.ĭespite all these features and an M-ATX form factor, the Gene-Z is also well laid out. Niche items such as the ProbeIt voltage monitoring points and the ROG connect external overclocking features are still present, for example. That’s not to say that all the crazy features have been cut out, though (it wouldn’t be a ROG board if it was completely sensible). Thankfully, Asus has been smart when considering which features to leave on the board.Įxcessively fluffy features such as ROG iDirect (which enables you to overclock the board via your smartphone) have been cut out, while useful technologies such as the Debug LED readout, BIOS Print and the onboard X-Fi sound codec remain. This certainly seems to be the case with the Gene-Z, as its feature list is relatively short for a board targeting enthusiasts and gamers. We’ve seen before that this process of shrinking the board can actually be beneficial, as it prompts Asus to strip out many of the needless, filler features that can often make ROG boards feel bloated. Click to enlargeThe Maximus IV Gene-Z follows the traditional Gene development path, as it’s a stripped back, more sensible version of a full-sized ATX board, the Maximus IV Extreme-Z.ĭon’t let this fool you into thinking it’s a less competent board, though.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |